Thursday, September 29, 2011

Signal increase in your Huwaei modem manually?


Please make sure that there is a strong signal, SUCH as WCDMA/HSDPA/3g, outside of your house than inside this trick in order to work properly and effectively. It will boost your modem reception for greater and stable signal.

If you have no technical skill in removing the case of your modem, better to call for an authorized technician as one SUCH. However, the trick is pretty easy just be careful. :)

Use at your own risk!

You need The following tools: 

* Screw Driver (8mm the small one)

Wire Extensions (just use thin wire) Electrolytic eg wires.

* Globe Tattoo / smartbro Modem

Instruction

Open your Huawei modem.  
1st * Remove the SIM Card and the SD Card if inserted












Please be careful to screw inserted after the wire. The modem chassis is plastic, thus fragile.


Getting out the wire is tricky. Follow how the picture below, it is on the side using knife or some sharp tools to Create a small hole. Just be careful to prevent any damaged to your modem. 

You can place the wire on your TV antenna or you can loop it in aluminum or any long object then place it outside of your house, high and safe.
You can also try to use commercially available signal booster / extension cable SUCH as CD-R King.
USB 2.0 Extension Cable with Signal / Data Booster (EF-0005F)


Features 
• USB 2.0 Specification Compliant 
• Data Transfer Rate up to 480Mbps 
• Plug & Play 
• No external power required 
• USB type A male to USB female type
ADAPTER USB File Transfer 
Php 650.00



·    Simple USB2.0 Plug-n-Play functionality
·    Bi-Directional Data Transfer Between two different computers or operating systems:
·    Notebooks and Desktops
·    Windows 2000, XP and Vista operating system compatible (For PC-to-PC only)
·    Windows and MAC compatible operating system (For PC-to-MAC / PC-to-PC)
·    Fast transfer rates up to 16Mb/second
·    Two easy steps of operation - simply connect and transfer
·    No file size or media capacity limitations SUCH as those found with external media cards
·     Easy Suite software for EasyMacCopy program loads automatically
USB 2.0 Extension Cable w / Signal Booster 5m 
Php 280.00


Compliant with USB 2.0
 Active USB extension cable, good signal quality to meet USB specification
      Can extend up to 25 meters (serial connection up to 5 segments)
       Supports Win98/2000/XP/Mac OS V9.0 or higher
LP-9181D Indoor Signal BOOSTER Php 1680.00


Features
Works with IEEE 802.11 b / g / n wireless LAN devices
Stronger output power improves the link quality and coverage
Analog gain control and power control 21dBm/IEEE 802.11n Linear Output Power
Linear Output Power 802.11g 24dBm/IEEE
Linear Output Power 29dBm/IEEE 802.11bn
MSL 1 (Moisture Sensitivity Levels) Tx LED (Blue) and Power LED (Blue)
Specifications:
Applications: WLAN 802.11 b / g / n for 11Mbps, 22Mbps, 54Mbps, 150Mbps Router, Access Point, USB adapter,
PCI Card Dimension (mm): Base: 98.4 (L) x 73 (W) x 22 (H) mm
Frequency Bandwidth: 2.4GHz? 2.5GHz
Storage Humidity: 10% ~ 90% (Non-condensing)
RF Input / Output Power (Typical): 1 ~ 19dBm Input Power, Output Power: 30dBm (MAX)
Operation Temperature: 0 ° C ~ 55 ° C
Receive Input Power / Gain: Input Power-16dBm (max.) Gain: 12dB
Typical Storage Temperature: -20 ° C ~ 70 ° C ambient temperature
RF Connector Type: Reverse SMA
Operation Voltage: DC 5V 1A
Antenna Type: Omni-Antenna 9dBi

0 comments:

Post a Comment